Your vehicle has PASS-Key® III+ (Personalized Automotive Security System) theft-deterrent system. PASS-Key® III+ is a passive theft-deterrent system.

The system is automatically armed when the key is removed from the ignition.

You do not have to manually arm or disarm the system.

The security light will come on if there is a problem with arming or disarming the theft-deterrent system.

When the PASS-Key® III+ system senses that someone is using the wrong key, it prevents the vehicle from starting. Anyone using a trial-and-error method to start the vehicle will be discouraged because of the high number of electrical key codes.

When trying to start the vehicle if the engine does not start and the security light comes on, there may be a problem with your theft-deterrent system. Turn the ignition off and try again.

If the engine still does not start, and the key appears to be undamaged, try another ignition key. At this time, you may also want to check the fuse, see Fuses and Circuit Breakers . If the engine still does not start with the other key, your vehicle needs service. If your vehicle does start, the first key may be faulty. See your dealer/retailer who can service the PASS-Key® III+ to have a new key made. In an emergency, contact Roadside Assistance. See Roadside Assistance Program , for more information.

It may be possible for the PASS-Key® III+ decoder to "learn" the transponder value of a new or replacement key.

If the two original keys are available, up to 8 additional keys can be programmed for the vehicle. If you only have one key that operates the vehicle, contact your dealer/retailer to program additional keys.

See your dealer/retailer or a locksmith who can service PASS-Key® III+ to get a new key blank that is cut exactly as the ignition key that operates the system.

To program the new key:

1. Verify that the new key has a stamped on it.
2. Start the engine using one of the previously programmed keys. If the engine will not start, see your dealer/retailer for service.
3. Turn the ignition off and remove the key.
4. Within five seconds of turning the ignition off, insert the other previously programmed key and start the engine. If the engine does not start, see your dealer/retailer for service.
5. Turn the ignition off and remove the key.
6. Within five seconds of turning the ignition off, insert the key that you are programming and start the engine. Once the key is programmed, the security light will turn off.
7. Repeat the previous steps to program additional keys.

If you are ever driving and the security light comes on and stays on, you may be able to restart your engine if you turn it off. Your PASS-Key® III+ system, however, is not working properly and must be serviced by your dealer/retailer. Your vehicle is not protected by the PASS-Key® III+ system at this time.

If you lose or damage your PASS-Key® III+ key, see your dealer/retailer or a locksmith who can service PASS-Key® III+ to have a new key made.

Do not leave the key or device that disarms or deactivates the theft deterrent system in the vehicle.

Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment.