Blower Motor Resistor Replacement. Opel GT 2008

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2008 🢒 GT 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Blower Motor Resistor Replacement

Callout	Component Name
Preliminary Procedure Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement .
1	Blower Motor Resistor Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Procedure Disconnect the blower motor resistor electrical connector. Tighten 1.5 N·m (13 lb in)
2	Blower Motor Resistor

Callout

Component Name

Blower Motor Resistor Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Disconnect the blower motor resistor electrical connector.

Tighten
1.5 N·m (13 lb in)

Blower Motor Resistor