Preliminary Procedures

1. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
2. Drain the washer solvent into a suitable clean container.

1

Windshield Washer Pump Hose Assembly

Procedure

1. Disconnect the hose at the hinge pillar and air inlet panel.
2. Disengage the integral washer hose clip from the electronic control module (ECM) bracket.

2

Windshield Washer Solvent Container Screws (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

3

Windshield Washer Container Assembly

Tip
Lower the windshield washer container from behind the left front fender area.

4

Windshield Washer Container Pump Kit

Procedure
Disconnect the washer hose at the pump and use two flat-bladed tools and pry the washer pump from the container.