GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2009 🢒 GT 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Coolant Thermostat Replacement

Removal Procedure

    Object Number: 1826444 Size: SH
  1. Drain the cooling system. Refer to Cooling System Draining and Filling.
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement.
  3. Reposition the radiator outlet hose clamp (1) at the thermostat housing.
  4. Remove the radiator outlet hose from the thermostat housing.

    5. Object Number: 1713064 Size: SH
  5. Remove the thermostat housing cover bolts and cover.
  6. Remove the thermostat.
  7. Remove and discard the thermostat housing O-ring seal.

Installation Procedure

    Object Number: 1713064 Size: SH
  1. Install a NEW thermostat housing cover O-ring seal onto the housing.
  2. Install the thermostat.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the thermostat housing cover and bolts and tighten to 10 N·m (89 lb in).

    4. Object Number: 1826444 Size: SH
  4. Install the radiator outlet hose to the thermostat housing.
  5. Reposition the radiator outlet hose clamp (1) at the thermostat housing.
  6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement.
  7. Fill the cooling system. Refer to Cooling System Draining and Filling.