For 1990-2009 cars only
Removal Procedure
- Release the engine wiring harness clip from the power brake booster vacuum pump bracket and position aside.
- Loosen the 2 clamps and remove the charged air hose from the throttle body and the intake air pipe.
- Disconnect the power brake booster auxiliary pump electrical connector.
- Release the clamp and disconnect the power brake booster auxiliary pump to brake booster vacuum hose (1).
- Remove the power brake booster auxiliary pump to engine bolt (1).
- Remove the 2 power brake booster auxiliary pump to engine nuts (1).
- Remove the power brake booster auxiliary pump and bracket (1) from the engine.
- Remove the 2 power brake booster auxiliary pump to bracket nuts and bolts, if necessary and remove the pump from the bracket.
Installation Procedure
- If removed, install the power brake booster auxiliary pump to the bracket.
- Install power brake booster auxiliary pump bolts and nuts and tighten to 10 N·m (89 lb in).
- Position the power brake booster auxiliary pump and bracket to the engine.
- Install the 2 power brake booster auxiliary pump nuts (1) and tighten to 22 N·m (16 lb ft).
- Install the power brake booster auxiliary pump to bracket to engine bolt (1) and tighten to 22 N·m (16 lb ft).
- Connect the brake booster vacuum hose (1) to the power brake booster auxiliary pump and install the clamp.
- Connect the power brake booster auxiliary pump electrical connector.
- Install the charged air hose to the throttle body and the intake air pipe and tighten the 2 clamps.
- Install the engine wiring harness clip to the power brake booster vacuum auxiliary pump bracket.
Caution: Refer to Fastener Caution in the Preface section.
