GM Service Manual Online
For 1990-2009 cars only

Object Number: 1579979  Size: MF

Callout

Component Name

Preliminary Procedure

Remove the headlamps. Refer to Headlamp Replacement.

1

Hood Hinge Nut (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tip

  1. Disconnect the wiring harness from the hood on both sides.
  2. Mark the hood for proper alignment for re-installing.

Tighten
25 N·m (18 lb ft)

2

Hood

Warning:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.