Inflatable Restraint Front End Sensor Replacement. Opel GT 2009

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 GT 🢒 Safety and Security 🢒 Supplemental Inflatable Restraints 🢒 Inflatable Restraint Front End Sensor Replacement

Callout	Component Name
1	Inflatable Restraint Front End Discriminating Sensor Stud (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Procedure Loosen the studs and slide the module up and out of the keyhole slots. Tighten 8 N·m (71 lb in)
2	Inflatable Restraint Front End Discriminating Sensor Assembly Warning: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs. Warning: Refer to SIR Warning in the Preface section.

Callout

Component Name

Inflatable Restraint Front End Discriminating Sensor Stud (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Loosen the studs and slide the module up and out of the keyhole slots.

Tighten
8 N·m (71 lb in)

Inflatable Restraint Front End Discriminating Sensor Assembly

Warning: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Warning: Refer to SIR Warning in the Preface section.