For 1990-2009 cars only
Special Tools
| • | EN 45059 Torque Angle Sensor Kit |
| • | EN 46792 Crankshaft/Flywheel Holder |
For equivalent regional tools, refer to Special Tools.
- Install the flywheel.
- Install the 6 NEW flywheel bolts.
- Hold the crankshaft with EN 46792 holder , tighten the bolts in sequence evenly to 160 N·m(118 lb ft) , using the EN 45059 angle sensor .
Caution: Refer to Fastener Caution in the Preface section.
