Stabilizer Shaft Link Replacement. Opel Insignia HB (Global Epsilon) 2009

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 Insignia HB (Global Epsilon) 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Stabilizer Shaft Link Replacement

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
1	Stabilizer Shaft Link Fastener (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 50 N·m(37 lb ft)
2	Stabilizer Shaft Link

Callout

Component Name

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

Stabilizer Shaft Link Fastener (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m(37 lb ft)

Stabilizer Shaft Link