Front Wheel Bearing and Hub Replacement. Opel Insignia HB (Global Epsilon) 2009

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 Insignia HB (Global Epsilon) 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Front Wheel Bearing and Hub Replacement

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Remove the front brake rotor. Refer to Front Brake Rotor Replacement. Loosen the wheel drive shaft from the wheel bearing/hub. Refer to LINK.
1	Wheel Hub Mounting Fastener (Qty: 3) Caution: Refer to Fastener Caution in the Preface section. Procedure Install NEW fasteners. Tighten 100 N·m(74 lb ft) + 75 degrees
2	Front Wheel Bearing and Hub

Callout

Component Name

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
Remove the front brake rotor. Refer to Front Brake Rotor Replacement.
Loosen the wheel drive shaft from the wheel bearing/hub. Refer to LINK.

Wheel Hub Mounting Fastener (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Install NEW fasteners.

Tighten
100 N·m(74 lb ft) + 75 degrees

Front Wheel Bearing and Hub