Vehicle Identification Number
The Vehicle Identification Number (VIN) Derivative is located in 2 places on the engine and is a nine digit number stamped or laser etched onto the block at the vehicle assembly plant. If reading the identification number the following information can be obtained:
| • | The first digit identifies the vehicle division. |
| • | The second digit is the model year. |
| • | The third digit identifies the assembly plant. |
| • | The fourth through ninth digits are the last six digits of the Vehicle Identification Number (VIN). |
The engine block is marked with the VIN on a pad area on the left rear side (1).
The engine block is marked with the VIN on a pad area on the center lower right side (1).
Engine Traceability Label
The engine traceability label is located in 2 places on the engine and consists of the broadcast code, bar code and sequence number.
One engine traceability label (1) is located on the left rear side of the engine block.
Another engine traceability label (1) is located on the rear of the left cylinder head.
Engine Verification Label
The engine verification label is located in 2 places on the engine and consists of the broadcast code and bar code.
One engine verification label (1) is located on the left side of the engine front cover below the exhaust camshaft position sensor.
Another engine verification label (1) is located on the rear of the right cylinder head.
Engine Identification Number
Note: When installing a part engine, the engine number must be stamped on the cylinder block before the engine is installed.
The engine code must be stamped into the flat area on the cylinder block on the transmission side (1), next to the starter.
