Crankshaft Position Sensor Replacement. Opel Insignia HB (Global Epsilon) 2009

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 Insignia HB (Global Epsilon) 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Crankshaft Position Sensor Replacement

Callout	Component Name
Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the starter motor. Refer to Starter Replacement.
1	Crankshaft Position Sensor Fastener Caution: Refer to Fastener Caution in the Preface section. Tighten 10 N·m (89 lb in)
2	Crankshaft Position Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
Remove the starter motor. Refer to Starter Replacement.

Crankshaft Position Sensor Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

Crankshaft Position Sensor

Disconnect the electrical connector.