GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2009 🢒 Insignia HB (Global Epsilon) 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Wheel Inflatable Restraint Module Coil Replacement

Object Number: 2019039 Size: SH

Callout

Component Name

Preliminary Procedures

  1. Remove the steering wheel. Refer to Steering Wheel Replacement.
  2. Loosen the steering column trim covers for access. Refer to Steering Column Trim Cover Replacement.

1

Inflatable Restraint Steering Wheel Module Coil Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
15 N·m (11 lb ft)

2

Inflatable Restraint Steering Wheel Module Coil

Procedure

  1. Disconnect any electrical connectors as needed.
  2. Transfer the steering wheel position sensor. Refer to Steering Wheel Position Sensor Replacement.

Tip

    • Do not remove the centering tab from a new inflatable restraint steering wheel module coil until it has been installed or re-centering will be required.
    • If re-centering of the inflatable restraint steering wheel module coil is needed then refer to Inflatable Restraint Steering Wheel Module Coil Centering.