Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake. Opel Insignia Wagon (Global Epsilon) 2009

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 Insignia Wagon (Global Epsilon) 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake

Callout	Component Name
Preliminary Procedure Remove the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side.
1	Camshaft Position Sensor Fastener Caution: Refer to Fastener Caution in the Preface section. Tighten 10 N·m (89 lb in)
2	Camshaft Position Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure

Remove the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side.

Camshaft Position Sensor Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

Camshaft Position Sensor

Procedure

Disconnect the electrical connector.