Stabilizer Shaft Link Replacement. Opel Insignia Wagon (Global Epsilon) 2009

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 Insignia Wagon (Global Epsilon) 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Link Replacement

Stabilizer Shaft Link Replacement GNC

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
1	Stabilizer Shaft Link Nut Caution: Refer to Fastener Caution in the Preface section. Procedure Load the rear suspension with the proper jack stand before tightening the nut to specifications. Tighten 50 N·m(37 lb ft)
2	Stabilizer Shaft Link Bolt Procedure Load the rear suspension with the proper jack stand before tightening the bolt to specifications. Tighten 50 N·m(37 lb ft)
3	Stabilizer Shaft Link

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
1	Stabilizer Shaft Link Nut (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 50 N·m(37 lb ft)
2	Stabilizer Shaft Link

Callout

Component Name

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

Stabilizer Shaft Link Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m(37 lb ft)

Stabilizer Shaft Link