GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2009 🢒 Insignia Wagon (Global Epsilon) 🢒 Suspension 🢒 Wheel Alignment 🢒 Rear Camber Adjustment

    Object Number: 2018874 Size: SH
  1. Loosen the upper control arm-to-frame fastener enough to allow movement.

    2. Note: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.

  2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
  3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
  4. Reinspect the rear camber specifications and adjust as necessary.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Hold the nut and tighten the NEW upper control arm-to-frame bolt.

    6. Tighten
    150 N·m(111 lb ft)

  6. Repeat the procedure for the other rear wheel.