Liftgate Latch Striker Replacement. Opel Insignia Wagon (Global Epsilon) 2009

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 Insignia Wagon (Global Epsilon) 🢒 Body Systems 🢒 Vehicle Access 🢒 Liftgate Latch Striker Replacement

Callout	Component Name
Preliminary Procedure Remove the rear end trim finish panel. Refer to Rear End Trim Finish Panel Replacement.
1	Liftgate Latch Striker Fastener (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Procedure Use a grease pencil to outline the striker before removing the fastener. Tighten 22 N·m (16.2 lb ft)
2	Liftgate Latch Striker Tip Adjust the liftgate latch striker after replacing, if needed.

Callout

Component Name

Remove the rear end trim finish panel. Refer to Rear End Trim Finish Panel Replacement.

Liftgate Latch Striker Fastener (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Use a grease pencil to outline the striker before removing the fastener.

Tighten
22 N·m (16.2 lb ft)

Liftgate Latch Striker

Tip
Adjust the liftgate latch striker after replacing, if needed.