Rear End Spoiler Replacement. Opel Insignia Wagon (Global Epsilon) 2009

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 Insignia Wagon (Global Epsilon) 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear End Spoiler Replacement

Callout	Component Name
Preliminary Procedure Remove the liftgate trim finish panel. Refer to LINK. Use a suitable tool to detach the left and right corner of the rear end spoiler. From the rear to the end spoiler fascia, apply a double layer of masking tape around the perimeter of the painted surfaces.
1	Rear End Spoiler Fastener (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten X N·m (X lb in)
2	Rear End Spoiler

Callout

Component Name

Remove the liftgate trim finish panel. Refer to LINK.
Use a suitable tool to detach the left and right corner of the rear end spoiler.
From the rear to the end spoiler fascia, apply a double layer of masking tape around the perimeter of the painted surfaces.

Rear End Spoiler Fastener (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
X N·m (X lb in)

Rear End Spoiler