GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  2. Remove the tilt lever. Refer to Tilt Lever Replacement - On Vehicle .
  3. Remove the steering wheel. Refer to Steering Wheel Replacement .
  4. Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  5. Remove the steering column trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .
  6. Remove the steering column tilt head. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle .

Installation Procedure

  1. Install the steering column tilt head. Refer to Steering Column Tilt Head Housing - Assemble - Off Vehicle .
  2. Install the steering column trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .
  3. Install the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  4. Install the steering wheel. Refer to Steering Wheel Replacement .
  5. Install the tilt lever. Refer to Tilt Lever Replacement - On Vehicle .
  6. Enable the SIR system. Refer to Enabling the SIR System in SIR.