GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 1999 🢒 Sintra 🢒 Restraints 🢒 SIR 🢒 Inflatable Restraint Side Impact Sensor Replacement

Removal Procedure

    Object Number: 260342 Size: SH
  1. Disable the SIR system. Refer to Disabling the SIR System Disabling the SIR System .
  2. Remove the front seat carpet retainer. Refer to Front Side Door Sill Plate Replacement in Interior Trim.
  3. Remove the seat belt retractor trim cover. Refer to Seat Belt Retractor Replacement - Left Front or Seat Belt Retractor Replacement - Right Front in Seat Belts.
  4. Loosen the two inflatable restraint side impact sensor fasteners (2).

    5. Object Number: 260343 Size: SH
  5. Remove the inflatable restraint side impact sensor (3) from the B-pillar.

    6. Object Number: 260344 Size: SH
  6. Lift the connector position assurance (CPA) (3) and remove the inflatable restraint side impact sensor yellow 2-way connector (2) from the inflatable restraint side impact sensor (1).

Installation Procedure

    Object Number: 260344 Size: SH
  1. Connect the inflatable restraint side impact sensor yellow 2-way connector (2) to the inflatable restraint side impact sensor (1) and install the connector position assurance (CPA) (3).

    2. Object Number: 260343 Size: SH
  2. Install the inflatable restraint side impact sensor (3) to the B-pillar.

    3. Object Number: 260342 Size: SH
  3. Install the fasteners to the inflatable restraint side impact sensor.

    4. Tighten
    Use only hand tools to tighten the fasteners to 10 N·m (89 lb in). Refer to

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

    in Cautions and Notices.

  4. Install the seat belt retractor trim cover. Refer to Seat Belt Retractor Replacement - Left Front or Seat Belt Retractor Replacement - Right Front in Seat Belts.
  5. Install the front seat carpet retainer. Refer to Front Side Door Sill Plate Replacement in Interior Trim.
  6. Enable the SIR system. Refer to Enabling the SIR System Enabling the SIR System .