Removal Procedure
- Remove the instrument panel cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument Panel, Gauges and
Console.
- Pull out on the headlamp
switch in order to release the clips.
- Remove the headlamp switch.
- Disconnect the electrical connector.
Installation Procedure
- Connect the electrical connector.
- Install the headlamp switch
to the instrument panel:
2.1. | Align the pins with the alignment hole. |
2.2. | Push in the headlamp switch until secure. |
- Install the instrument cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
in Instrument Panel, Gauges and Console.