The slotted holes are provided at the hood hinge to upper fender rail attaching points for proper adjustment, both cross car, and fore and aft. Vertical adjustment at the front may be made by adjusting the rubber bumpers up and down. For best appearance, make one adjustment at a time.

1. Close the hood firmly.
2. Determine the amount of adjustment needed.
3. Open the hood.
4. Raise or lower the vertical adjustment screw at the rear of the hood hinge to the specified height.
5. If needed, repeat the procedure on the opposite side of the hood.

1. Close the hood firmly.
2. Determine the amount of adjustment needed.
3. Open the hood.



4. Raise or lower the front adjustable hood bumpers as required.

1. Loosen the hinge bolts/screws at the upper fender rail.
2. Reposition the hinge.
3. Tighten the hinge bolts/screws. Refer to Hood Hinge.
4. If needed, repeat the procedure on the opposite side of the hood.