GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the right rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .

  2. Object Number: 320099  Size: SH
  3. Disconnect the electrical connectors from the Power Sliding Door (PSD) actuator control module (2).
  4. Pull the PSD actuator control module (2) inboard in order to unhook the control module from the actuator motor.

Installation Procedure


    Object Number: 320099  Size: SH
  1. Push the PSD actuator control module (2) outboard in order to unhook the control module from the actuator motor.
  2. Install the PSD actuator control module electrical connectors.
  3. Perform the reinitialization procedure. Refer to Power Sliding Door (PSD) Re-Initialization .
  4. Install the right rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .