GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 1999 🢒 Sintra 🢒 Body and Accessories 🢒 Interior Trim 🢒 Roof Side Rail Lamp Replacement

Removal Procedure

    Object Number: 400617 Size: SH
  1. Using a small, flat-bladed tool, remove the coat hook access hole cover from the side rail reading lamp.
  2. Remove the screws from the side rail reading lamp.

    3. Object Number: 400622 Size: SH
  3. Remove the side rail reading lamp from the roof.
  4. Disconnect the electrical connectors from the side rail reading lamp.

Installation Procedure

    Object Number: 400622 Size: SH
  1. Connect the electrical connectors to the side rail reading lamp.
  2. Install the side rail reading lamp to the roof.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 400617 Size: SH
  3. Install the screws to the side rail reading lamp.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Snap the coat hook access hole cover back into place on the side rail reading lap