Turn the steering wheel
so that the vehicle's wheels are pointing straight ahead.
Turn OFF the ignition.
Remove the key from the ignition switch.
Remove the console accessory wiring junction block access hole
cover.
Important: With the SIR Fuse removed and the ignition ON, the AIR BAG indicator
illuminates. This is normal operation and does not indicate an SIR system
malfunction.
Remove the SIR Fuse.
Remove the LH insulator
panel.
Remove the connector position assurance (CPA) from the inflatable
restraint steering wheel module coil connector (1) located at the base of
the steering column.
Disconnect the steering wheel module coil connector (1).
Remove the RH insulator
panel.
Remove the CPA (2) from the inflatable restraint IP module connector
(1) located behind the RH insulator panel.
Disconnect the IP module connector (1).
Remove the CPA from the
inflatable restraint side impact module - LF connector (1) located under
the driver seat.
Disconnect the side impact module - LF connector (1).
Remove the CPA from the
inflatable restraint side impact module - RF connector (1) located under
the front passenger seat.
Disconnect the side impact module - RF connector (1).