For 1990-2009 cars only
Removal Procedure
- Remove the cell antenna base from the inside of the glass, by grasping the base and pulling outward.
- Disconnect the coaxial cable from the cell antenna base.
- Remove the antenna mast from the outside of the glass, by grasping the base and pulling outwards.
- Remove all residue by using a razor blade and isopropyl alcohol.
Installation Procedure
- Clean the glass at the installation location inside and outside with an alcohol wipe.
- Apply the mast assembly to the outside of the glass, below the blackout area.
- Obtain the pre-wired coax cable from behind the C-pillar trim.
- Connect the coaxial cable to the cell antenna base.
- Apply the cell antenna base to the inside of the glass.
- Install the mirror to the outer antenna placement.
