GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Aztek - FWD 🢒 Body and Accessories 🢒 Keyless Entry 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure
  1. Remove the upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 629215 Size: SH
  2. Disconnect the remote control door lock receiver electrical connector (1).

    3. Important: Disengage the remote control door lock receiver retainers and lift upward.

  3. Remove the remote control door lock receiver (2) from the defroster air duct.

Installation Procedure

    Object Number: 629215 Size: SH

    Important: Position the remote control door lock receiver to the defroster air duct.

  1. Install the remote control door lock receiver (2).
  2. Engage the remote control door lock receiver retainers.
  3. Connect the remote control door lock receiver electrical connector (1).
  4. Install the upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages and Console.
  5. If a new remote control door lock receiver is being installed, program the transmitter. Refer to Transmitter Programming .