GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Aztek - FWD 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 HVAC Control Module Replacement

HVAC Control Module Replacement Buick

Removal Procedure
  1. Remove the IP cluster trim plate bezel . Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 787410 Size: SH
  2. Remove the HVAC control module retaining screws.

    3. Object Number: 787411 Size: SH
  3. Pull the HVAC control module straight out from the IP.
  4. Disconnect the HVAC control module electrical connector.

Installation Procedure
  1. Connect the HVAC control module electrical connector.

    2. Object Number: 787411 Size: SH
  2. Install the HVAC control module into the IP opening.

    3. Object Number: 787410 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the HVAC control module retaining screws.

    4. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  4. Install the IP cluster trim plate bezel . Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.

HVAC Control Module Replacement Pontiac

Removal Procedure
  1. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 629137 Size: SH
  2. Remove the HVAC control module retaining screws.

    3. Object Number: 651475 Size: SH
  3. Pull the HVAC control module straight out from the instrument panel.
  4. Disconnect the HVAC control module electrical connectors.

Installation Procedure
  1. Connect the HVAC control module electrical connectors.

    2. Object Number: 651475 Size: SH
  2. Push the HVAC control module into instrument panel opening.

    3. Object Number: 629137 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the HVAC control module retaining screws.

    4. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  4. Install the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages, and Console.