GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Aztek - FWD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Endgate Handle Replacement

Removal Procedure

    Object Number: 625149 Size: SH
  1. Open the endgate.
  2. Remove the bolts from the endgate handle.
  3. Remove the endgate handle from the endgate handle assembly.

Installation Procedure

    Object Number: 625149 Size: SH
  1. Install the endgate handle to the endgate handle assembly.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts to the endgate handle.

    3. Tighten
    Tighten the endgate handle bolts to 10 N·m (89 lb in).

  3. Close the endgate.