Rear Number 2 Seat Replacement Rendezvous

1. Remove the rear storage compartment. Refer to Rear Storage Compartment Replacement .
2. Roll the second row seats forward.



3. Remove the front anchor nuts from the rear No. 2 seat.



4. Remove the seat.

1. Install the rear seat to the mounting studs.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the front anchor nuts to the mounting studs on the rear seat.

Tighten
Tighten the nuts to 50 N·m (37 lb ft).

3. Move the second row seat to the original position.
4. Install the storage compartment. Refer to Rear Storage Compartment Replacement .