GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Aztek - FWD 🢒 Body and Accessories 🢒 Entertainment 🢒 Radio Rear Side Door Speaker Replacement

Removal Procedure

    Object Number: 735333 Size: SH
  1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.
  2. Remove the screws from the speaker.
  3. Disconnect the electrical connector from the speaker.

    4. Object Number: 735325 Size: SH
  4. Remove the speaker from the rear door.

Installation Procedure

    Object Number: 735325 Size: SH
  1. Connect the electrical connector to the rear door speaker.

    2. Object Number: 735333 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Align the speaker to the rear door and install the screws.

    3. Tighten
    Tighten the speaker screws to 3.2 N·m (28 lb in).

  3. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.