Transmission Fluid Filler Tube Replacement LA1

1. Remove the oil level indicator from the filler tube.
2. Remove the air cleaner assembly Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.4L.



3. Remove the fluid filler tube nut from the EGR valve.
4. Remove the fluid filler tube bolt from the transaxle.
5. Remove the fluid filler tube.

Important: Do NOT place the fluid filler tube seal on the fluid filler tube when installing the tube or damage to the seal will result.




1. Install the fluid filler tube seal in the transaxle.
2. Install the fluid filler tube.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the fluid filler tube bolt.

Tighten
Tighten the bolt to 13 N·m (115 lb in).

4. Install the fluid filler tube nut.

Tighten
Tighten the nut to 13 N·m (115 lb in).

5. Inspect and adjust the fluid level as needed. Refer to the following information:

•	Transmission Fluid Check

•	Fluid and Lubricant Recommendations

•	Approximate Fluid Capacities