GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - FWD 🢒 Body 🢒 Body Front End 🢒 Front Fender Insulator Replacement

Removal Procedure

    Object Number: 621361 Size: SH
  1. Remove the front fender liner. Refer to Front Fender Liner Replacement .
  2. Remove the front fender insulator from the stud, by pulling off.
  3. Remove the front fender insulator from the inner fender.

Installation Procedure

    Important: The front fender insulator must be kept near the flange of the front fender wheel opening to avoid interference with the front door edge.


    Object Number: 621361 Size: SH
  1. Install the front fender insulator to the stud in the inner fender, pressing into place until fully seated.
  2. Install the front fender liner. Refer to Front Fender Liner Replacement .