GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - FWD 🢒 Body 🢒 Bumpers 🢒 Front Bumper Fascia Upper Support Replacement

Removal Procedure

    Object Number: 621383 Size: SH
  1. Remove the fascia. Refer to Front Bumper Upper Fascia Replacement .
  2. Remove the hood latch and cable. Refer to Hood Primary Latch Release Cable Replacement .
  3. Disconnect the headlamp wiring harness from the fascia upper support.
  4. Remove the bolts from the fascia upper support.

    5. Object Number: 621384 Size: SH
  5. Remove the fascia upper support from the upper radiator support.

Installation Procedure

    Object Number: 621384 Size: SH
  1. Position the fascia upper support to the upper radiator support.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 621383 Size: SH
  2. Install the bolts to the fascia upper support.

    3. Tighten
    Tighten the bolts to 5 N·m (44 lb in).

  3. Install the bolts to the fascia lower support.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  4. Connect the headlamp wiring harness to the fascia upper support.
  5. Install the hood latch and cable. Refer to Hood Primary Latch Release Cable Replacement .
  6. Install the front bumper fascia. Refer to Front Bumper Upper Fascia Replacement .