Front Bumper Fascia Energy Absorber Replacement Aztek

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the front bumper fascia. Refer to Front Bumper Upper Fascia Replacement .
2. Use J 38778 to remove the push-in retainers from the front bumper energy absorber .



3. Remove the energy absorber from the front bumper impact bar.

1. Position the energy absorber to the front bumper impact bar.



2. Starting with the center hole, install the push-in retainers to the front bumper energy absorber.
3. Install the front bumper fascia. Refer to Front Bumper Upper Fascia Replacement .

Front Bumper Fascia Energy Absorber Replacement Rendezvous

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the front bumper fascia. Refer to Front Bumper Upper Fascia Replacement .
2. Use J 38778 to remove the push-in retainers from the front bumper energy absorber .
3. Remove the energy absorber from the front bumper impact bar.

1. Position the energy absorber to the front bumper impact bar.
2. Starting with the center hole, install the push-in retainers to the front bumper energy absorber.
3. Install the front bumper fascia. Refer to Front Bumper Upper Fascia Replacement .