GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - FWD 🢒 Body 🢒 Interior Trim 🢒 Cargo Area Side Trim Panel Replacement

Removal Procedure

    Object Number: 736097 Size: SH
  1. Release the door with the handle and remove the door.
  2. Remove the screws holding the access plate.
  3. Disconnect the electrical connectors from the panel.
  4. Remove the panel.

Installation Procedure

    Object Number: 736097 Size: SH
  1. Align the panel with the access hole.
  2. Connect the electrical connectors to the panel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Screw the panel to the cargo side area.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Install the door access panel cover and lock the door with handle.