High Mount Stop Lamp Replacement Rendezvous

1. Remove the screws from the high mounted stop lamp.
2. Remove the high mounted stop lamp from the roof panel.
3. Disconnect the electrical connector from the high mounted stop lamp.
4. Remove the high mounted stop lamp from the roof panel.

1. Position the high mounted stop lamp to the roof panel.
2. Connect the electrical to the high mounted stop lamp.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the high mounted stop lamp screws to the high mounted stop lamp.

Tighten
Tighten the high mounted stop lamp screws to 3.5 N·m (31 lb in).

High Mount Stop Lamp Replacement Aztek

1. Remove the screws from the high mounted stop lamp.



2. Remove the high mounted stop lamp from the roof panel.
3. Disconnect the electrical connector from the high mounted stop lamp.



4. Remove the high mounted stop lamp plastic retainer nuts from the roof panel, using a small flat-bladed tool.

1. Install the high mounted stop lamp plastic retainer nuts to the roof panel pressing into place until fully seated.



2. Connect the electrical connector to the high mounted stop lamp.
3. Position the high mounted stop lamp retainer tabs to the slots in the roof panel.

Press the high mounted stop lamp in place until fully seated.

Notice: Refer to Fastener Notice in the Preface section.




4. Install the screws to the high mounted stop lamp.

Tighten
Tighten the high mounted stop lamp screws to 3.5 N·m (31 lb in).