GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - FWD 🢒 Body 🢒 Lighting Systems 🢒 Roof Side Rail Lamp Replacement

Removal Procedure

    Object Number: 791875 Size: SH
  1. Using a small, flat-bladed tool, remove the cover of the coat hook access hole from the roof side rail lamp.
  2. Using a small, flat-bladed tool, remove the cover from the lamp.
  3. Remove the screws from the lamp.

    4. Object Number: 400622 Size: SH
  4. Remove the lamp from the roof.
  5. Disconnect the electrical connectors from the lamp.

Installation Procedure

    Object Number: 400622 Size: SH
  1. Connect the electrical connectors to the roof side rail lamp.
  2. Install the lamp to the roof.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 791875 Size: SH
  3. Install the screws to the lamp.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Install the cover to the lamp.
  5. Install the cover of the coat hook access hole on the lamp.