GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - FWD 🢒 Body 🢒 Wipers/Washer Systems 🢒 Instrument Panel Multifunction Switch Replacement

Removal Procedure

    Object Number: 791874 Size: SH
  1. Remove the front floor console. Refer to Front Floor Console Trim Plate Replacement .
  2. Remove the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .

    3. Object Number: 791878 Size: SH
  3. Remove the bolts from the switch assembly.

    4. Object Number: 791879 Size: SH
  4. Remove the electrical connectors from the switch assembly.
  5. Remove the switch assembly.

Installation Procedure

    Object Number: 791879 Size: SH
  1. Install the electrical connections to the switch assembly.

    2. Object Number: 791878 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts to the switch assembly of the rear object alarm module.

    3. Tighten
    Tighten the bolts to 2 N·m (18 lb in)


    Object Number: 791874 Size: SH
  3. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  4. Install the front floor console. Refer to Front Floor Console Trim Plate Replacement .