GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - FWD 🢒 Accessories 🢒 Navigation Systems 🢒 Cellular and Navigation Antenna Assembly Replacement

Removal Procedure
  1. Remove the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
  2. Remove the sunshade from the headliner. Refer to Sunshade Replacement in Interior Trim.
  3. Remove the door edge molding from the door opening. Refer to Front Side Door Trim Panel Replacement in Doors.
  4. Lower the front corner of the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.

    5. Object Number: 838978 Size: SH
  5. Disconnect the wire harness from the roof antenna .
  6. Remove the antenna nut.
  7. Remove the antenna from the roof.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 838978 Size: SH
  1. Attach the antenna base to the roof and fasten the antenna nut.

    2. Tighten
    Tighten the nut to 2 N·m (18 lb in).


    Object Number: 838978 Size: SH
  2. Connect the electrical connector to the antenna.
  3. Push the headliner back into place. Refer to Front Side Door Trim Panel Replacement in Interior Trim.
  4. Attach the sunshade to the headliner. Refer to Sunshade Replacement in Interior Trim.
  5. Attach the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.