BACK WINDOW 'ITCH' NOISE (APPLY STICK LUBRICANT)

SUBJECT: BACK WINDOW ITCH NOISE (APPLY STICK LUBRICANT TO BODY SURFACE UNDER MOULDING)

VEHICLES AFFECTED: 1992 "H" MODELS ------------------------------------------------------------------------------

CONDITION:

---------- Some 1992 Bonneville models may exhibit a back window moulding to body itch noise condition.

CORRECTION:

----------- To correct this condition, lift the lower edge of the back window reveal moulding and apply the stick lubricant to the body surface under the moulding. This lubricant must be applied the entire length of the reveal moulding.

The stick lubricant used for this repair is available from sources such as Ace Hardware, Western Auto under the name Door-Ease Stick Lubricant Part No. DE3 or DEK3. NAPA Auto Stores also sell this product under part number 765-1385.

We believe these sources and their equipment to be reliable. There may be additional manufacturers of such equipment. General Motors does not endorse, indicate any preference for or assume any responsibility for the products or equipment from these firms or for any such items which may be available from other sources.

If vehicle is being repaired under warranty use:

Labour Time: .2 hr.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.