LOOSE BODY SIDE MOLDING (INSTALL NEW CLIPS)

SUBJECT: LOOSE OR BROKEN SIDE MOULDINGS (INSTALL NEW MOULDING OR NEW CLIP)

VEHICLES AFFECTED: 1992 "H" MODELS PONTIAC BONNEVILLE

THIS BULLETIN IS BEING REVISED TO ADD NEW MOULDINGS AND PART NUMBERS.

CONDITION:

--------- Some 1992 Bonneville models may exhibit loose body side mouldings due to retaining clip breakage or the bright moulding retaining screws breaking in the moulding.

CORRECTION:

---------- To correct this condition, new moldings and a new clip have been released. This new clip is part number 12519974. The new moldings are as follows:

Moulding Part Number -------- ----------- Right Front Door 25613520 Left Front Door 25613521 Right Rear Door 25613522 Left Rear Door 25613523

WARRANTY INFORMATION:

For vehicles repaired under warranty use the appropriate Labour Operation and Time from the 1992 Labour Time Guide.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.