Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Connect a scan tool to the data link connector (DLC).
- Turn the ignition switch to ON.
- Select powertrain control module (PCM) on the scan tool and check
for PCM DTCs.
| No PCM DTCs appear on the scan tool.
| One or more PCM DTCs appear on
the scan tool. Refer to
Diagnostic Trouble Code (DTC) List
in Engine Controls - 3.8L
|
2
|
- Drive the vehicle above 40 km/h (25 mph).
- Place the CRUISE switch in the ON position.
- Press the SET button once and release the button.
- Remove your foot from the accelerator pedal.
| The vehicle maintains
the set speed.
|
Cruise Control Inoperative
|
3
|
- Press and hold the R/A switch until the vehicle speed increases
by 6 to 8 km/h (4 to 5 mph).
- Release the R/A switch.
|
- The vehicle accelerates.
- The vehicle maintains the new higher set speed.
|
Cruise Control Inoperative
|
4
|
- Press and hold the SET button until the vehicle speed decreases
by 6 to 8 km/h (4 to 5 mph).
- Release the SET button.
| Provided that the speed is above 40 km/h
(25 mph), the following actions occur:
• | The vehicle decelerates to a new lower set speed. |
• | The vehicle maintains the new lower set speed. |
|
Cruise Control Inoperative
|
5
| Press the brake pedal slightly.
|
- The cruise control disengages.
- The memory is unchanged.
|
Cruise Control Inoperative
|
6
|
- Press the R/A switch once.
- Release the R/A switch.
|
- The vehicle accelerates to the previously set speed.
- The vehicle maintains the previously set speed.
|
Cruise Control Inoperative
|
7
|
- Press the R/A switch once (tap up).
- Release the R/A switch within less than ¾ second.
|
- The vehicle speed increases by 1 mph.
- The vehicle maintains the new set speed.
|
Cruise Control Inoperative
|
8
| Press the SET button once (tap down) then release
the button within less than 3/8 of a second.
|
- The vehicle speed decreases by 1 mph.
- The vehicle maintains the new set speed.
|
Cruise Control Inoperative
|
9
| Press the SET button and the R/A switch at the same time.
|
- The cruise control disengages.
- The memory is unchanged.
|
Cruise Control Inoperative
|
10
| Place the CRUISE switch in the OFF position.
|
- The cruise control disengages.
- The set speed memory is erased.
|
Cruise Control Inoperative
|