- Ensure that the window
is in the full up position.
- Remove the trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Remove the water deflector. Refer to
Door Water Deflector Replacement
.
- Tighten the front run channel bolt in the center of the slot.
- Loosen the fasteners that retain the window to the module sash.
- Power the glass down 9 cm (3 in).
- Slide the glass rearward in the sash fasteners.
- Power the glass up.
- Pry the glass up with a large flat screwdriver.
- Tighten the fasteners that retain the window to the module sash.
- Cycle the window up and down in order to inspect operation.
- Install the water deflector. Refer to
Door Water Deflector Replacement
.
- Install the trim panel. Refer to
Front Side Door Trim Panel Replacement
.