Removal Procedure
- Cycle the glass panel to the rear.
- Push out the pin (5) in the deflector left arm (1)
from each side.
Important: Note the positions of the springs (3) prior to removal in order
to ensure proper operation after assembly.
- Remove the springs (3).
- Raise the deflector left arm (1) to the vertical position.
- Snap the molded pin (5) out of the bracket (4).
Installation Procedure
Important: Using pliers, squeeze the bracket arms (4) in order to ensure
a secure fit.
- Install the pin (5) in the deflector arm (1) on each side.
Important: Note the position of the springs (3) to the lifter
arm from the removal position.
- Install the springs (3) to each side of the deflector arm (1).