Rear Bumper Fascia Molding Replacement Buick

1. Gently peel the following components away from the fascia (1):

•	The molding (2)

•	The nameplate (3)

2. Clean the attaching surface with a general adhesive remover.

1. Peel the backing away from the adhesive tape on the new molding (2) and on the nameplate (3).
2. Apply the following components to the fascia (1):

•	The molding (2)

•	The nameplate (3)

Rear Bumper Fascia Molding Replacement Oldsmobile 88

1. Gently peel the molding (2) away from the fascia (1).
2. Clean the attaching surface with a general adhesive remover.

1. Peel the backing away from the adhesive tape on the new molding (2).
2. Apply the molding onto the fascia (1).