- Remove the steering column tilt head housing. Refer to
Steering Column Tilt Head Housing - Disassemble - Off Vehicle
.
- If necessary, disconnect
the connector from the windshield wiper and washer switch assembly.
- Remove the windshield wiper and washer switch assembly in the
following way:
3.1. | Press on the locking tabs of the windshield wiper and washer switch
assembly. |
3.2. | Pull the windshield wiper and washer switch assembly out of the
signal switch housing. |
- Remove the 2 pan
head tapping screws (1).
- Remove the signal switch housing (2).