Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
SCHEMATIC REFERENCE: Fog Lights Schematics | ||||
1 | Did you perform the Lighting System Diagnostic System Check? | -- | ||
2 |
Does the scan tool indicate that the fog lamp switch is OFF? | -- | ||
3 | With a scan tool, observe the fog lamp relay control status. Does the scan tool indicate the fog lamp relay is OFF? | -- | ||
4 |
Did the fog lamps turn OFF? | -- | ||
5 |
Does the test lamp illuminate? | -- | ||
6 | Test for a short to ground in the fog lamp relay control circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
7 | Inspect for poor connections at the dash integration module (DIM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
8 | Replace the DIM. Refer to Dash Integration Module Replacement in Body Control System. Did you complete the replacement? | -- | -- | |
9 |
Does the scan tool indicate the fog lamp switch is OFF? | -- | ||
10 | Test the fog lamp switch input circuit at the climate control panel (CCP) w/C67 or the instrument panel module (IPM) w/CJ2 for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
11 | Inspect for poor connections at the IPM w/CJ2 or CCP w/C67. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
12 | Replace the IPM module w/CJ2 or the CCP w/C67. Refer to Instrument Panel Module Replacement in Body Control System or Control Assembly Replacement in HVAC Systems - Manual. Did you complete the replacement? | -- | -- | |
13 | Inspect for poor connections at the fog lamp switch connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
14 | Replace the fog lamp switch. Refer to Fog Lamp Switch Replacement . Did you complete the replacement? | -- | -- | |
15 | Repair the short to power in the fog lamp power feed circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did to complete the repair? | -- | -- | |
16 | Inspect for poor connections at the fog lamp relay. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
17 | Replace the fog lamp relay. Refer to Wiring Repairs in Wiring Systems. Did you complete the replacement? | -- | -- | |
18 | Operate the system in order to verify the repair. Did you find and correct the condition? | -- | System OK | |
