Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
SCHEMATIC REFERENCE: Exterior Lights Schematics | ||||
1 | Did you perform the Lighting System Diagnostic System Check? | -- | ||
2 | Connect a test lamp between the hazard flasher switch power feed circuit and a good ground. Does the test light illuminate? | -- | ||
3 | Connect a test lamp between the hazard flasher switch power feed circuit and the hazard flasher switch ground circuit. Does the test light illuminate? | -- | ||
4 | Repair the open or high resistance in the hazard flasher power feed circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
5 | Repair the open or high resistance in the hazard flasher switch ground circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
6 | Inspect for poor connections at the hazard flasher switch connector. Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
7 | Replace the hazard flasher switch. Refer to Hazard Lamp Flasher Replacement . Did you complete the replacement? | -- | -- | |
8 | Operate the system in order to verify the repair. Did you find and correct the condition? | -- | System OK | |
