Removal Procedure
- Remove the knee bolster.
Refer to
Knee Bolster Replacement
in
Interior Trim.
- Remove the instrument cluster trim plate bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Interior
Trim.
- Remove the radio. Refer to
Radio Replacement
in Entertainment.
- Remove the PASS-Key III® module (3) from the instrument
panel.
4.1. | Insert your right hand through the opening at the left side of
the radio opening. |
4.2. | Push the tab (1) towards the left side of the vehicle. |
4.3. | Grasp the module through the knee bolster opening. |
4.4. | Push the module (3) forward to remove. |
- Disconnect the electrical connector (2).
Installation Procedure
- Install the electrical
connector (2).
- Install the PASS-Key III® module into the instrument
panel.
2.1. | Align the module (3) to the opening in the instrument panel. |
2.2. | Pull the module rearward until the retainer tab (1) snaps
in place. |
- Install the radio. Refer to
Radio Replacement
in Entertainment.
- Install the instrument cluster trim plate bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Interior
Trim.
- Install the knee bolster. Refer to
Knee Bolster Replacement
in Interior Trim.